Nyrius Troubleshooting

The only issue we have had with a Nyrius so far was the Grimes location's became unpaired somehow.

Here are the steps to pair the receiver/transmitter again:

1. Make sure everything is unplugged. Both receiver and transmitter

2. Hold the power button on the receiver and plug the power back in, release the power button when it starts to flash/blink.

3. "Please Activate Registration on Transmitter Unit" Will show up on the screen the transmitter is plugged into.

4. Connect the the power for the transmitter and then hold the pairing button, (on the back side) until the white light go from flashing very quickly to slow.

5. The tv will then show "Adding NPCS549", at least it did for Grimes in this case.

Nyrius says this can be done to fix:
No Sound

No video

Image quality issues